Sold out.
Description:
**Data Cable Sold Separately: GV600M Upgrade Kit**
The GV600M is a ruggedized, IP67 compliant waterproof GNSS tracker specially designed for trailer, tanker, refer and flatbed truck tracking for use in harsh trucking environments, sealed against common fuel oils and other hazardous chemicals. The device has a 120-day standby time using an internal rechargeable 5800 mAh battery pack and supports dual external power sources for redundancy. The GV600M supports an external temperature sensor and includes a 1-wire interface.
Features:
- IP67 Waterproof Ruggedized Case
- Multiple I/O Interfaces and a 1-wire Interface that supports external temperature sensor
- Full power management, can be hardwired through RS232 Port or used as a rechargeable portable device
- Internal 3-axis accelerometer for power saving and motion detection
- BLE 4.2
| Region | Sub Model | Network/Operating Band | GNSS Type | Certificate |
| North America | GV600MA |
LTE eMTC/NB-IoT / LTE B2/B4/B5/B12/B13 |
u-blox All-in-One receiver | FCC/Verizon |
| North America | GV600MG_S |
Cat M1/Cat NB1:LTE FDD: B1/B2/B3/B4/ B5/B8/B12/B13/B18/B19/B20/B25*/B28 |
u-blox All-in-One receiver | FCC/Sprint |
| Worldwide |
GV600MG |
Cat M1/Cat NB1:LTE FDD: B1/B2/B3/B4/ B5/B8/B12/B13/B18/B19/B20/B25*/B28 |
u-blox All-in-One receiver | FCC/Verizon/CE/E-Mark (Planned) |
*B25 is supported on GV600MG_S
Specifications
| Operating Band | See Sub Model |
| Data Transmission |
eMTC (DL) 375Kbps |
| GNSS Type | u-blox All-in-One GNSS receiver |
| Sensitivity | Autonomous: -147 dBm Hot Start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.5m |
| TTFF (Open Sky) | Cold start: 27s average Warm start: 27s average Hot start: 1s average |
| Dimensions | 138mm(L) x 66mm(W) x 38mm(H) |
| Weight | 320g |
| Backup Battery |
Two options: |
| Standby Time | 5200 mAh Battery: 90 days, report one location and online 15 minutes per day 5800 mAh Battery: 120 days, report one location and online 15 minutes per day |
| Waterproof | IP67 Compliant |
| Internal G-sensor | Used for speed alarm and motion alarm |
| Operating Voltage | 8V to 32V DC |
| Operating Temperature | -20℃ ~ +60℃ |
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
| Geo-fences | Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions |
| Low Power Alarm | Alarm when backup battery is almost exhausted |
| Power On Report | Report when the device is powered on |
| Bluetooth | Support BLE 4.2 protocol |
| Special Alarm | Special alarm based on digital/analog inputs, preset speed and internal 3-axis accelerometer |
| Remote Control | OTA control of digital outputs |
| Digital Inputs | 1 positive trigger input for ignition detection 4 negative trigger input for normal use |
| Digital Outputs | 4 digital outputs, open drain, 150mA max drive current |
| Analog Input | 1 analog input (0V-32V) |
| 1-wire Interface | Support 1-wire temperature sensor (maximum 8 channels) |
| Power Output | 1 power output (3.3V) for external devices |
| Serial Port | 1 RS232 port |
| Cellular Antenna |
Internal Only
|
| GNSS Antenna | Internal Only |
| Bluetooth Antenna | Internal Only |
| LED Indicators | CEL, GNSS, PWR |
| Connector | 18 pin waterproof connector |
